web analytics

Author Archive: admin

Valid 400-151 Dumps with VCE and PDF for Free (Question 41 – Question 60)

New 400-151 exam questions from PassLeader 400-151 dumps! Welcome to download the newest PassLeader 400-151 VCE and PDF dumps: http://www.passleader.com/400-151.html (295 Q&As – 2019 NEW VERSION!)

P.S. Free 400-151 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpVmo1Q01pZEhTUG8

QUESTION 41
Refer to the exhibit. Which option describes when this server reboots?

A.    When the vnic/vhba placement is changed
B.    When the user acknowledges the reboot
C.    Immediately after the next change
D.    When the schedule is set to occur

New 400-151 Dumps with VCE and PDF from PassLeader (Question 21 – Question 40)

New 400-151 exam questions from PassLeader 400-151 dumps! Welcome to download the newest PassLeader 400-151 VCE and PDF dumps: http://www.passleader.com/400-151.html (295 Q&As – 2019 NEW VERSION!)

P.S. Free 400-151 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpVmo1Q01pZEhTUG8

QUESTION 21
Which three statements about ASM and SSM are correct? (Choose 3)

A.    By Default, the SSM group range from PIM is 232.0.0.0/8 and for PIM6 is FF3X/96.
B.    ASM mode requires that you configure an RP.
C.    PIM ASM is not fully supported on a vPC.
D.    If you want to use the default SSM group range, you must configure the SSM group range.
E.    In ASM mode, only the last-hop router switches from the shared tree to the SPT.

Free PassLeader 400-151 Exam Dumps with VCE and PDF Download (Question 1 – Question 20)

New 400-151 exam questions from PassLeader 400-151 dumps! Welcome to download the newest PassLeader 400-151 VCE and PDF dumps: http://www.passleader.com/400-151.html (295 Q&As – 2019 NEW VERSION!)

P.S. Free 400-151 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpVmo1Q01pZEhTUG8

QUESTION 1
Which three guidelines and limitation of policy-based routing are true? (Choose 3)

A.    A match command can refer to more than one ACL in a route map used for policy-based routing
B.    The same route map can be shared among different interfaces for policy-based routing as long as the interfaces belong to the same VRF instance
C.    Setting a tunnel interface or an IP address via a tunnel interface as a next hop in a policy-based routing policy is not supported
D.    An ACL used in a policy-based routing route map cannot include a deny statement
E.    A policy-based routing route mao can have multiple match or set statements per route-map statement
F.    Policy-based routing and WCCPv2 are not supported on the same interface chaining is disabled

Cisco CCNA 200-125 Dumps With VCE and PDF Download (Question 181 – Question 200)

New 200-125 exam questions from PassLeader 200-125 dumps! Welcome to download the newest PassLeader 200-125 VCE and PDF dumps: http://www.passleader.com/200-125.html (929 Q&As –> 1096 Q&As –> 1166 Q&As)

P.S. Free 200-125 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpeHlmcExhU2FVY00

QUESTION 181
Which statement is correct regarding the operation of DHCP?

A.    A DHCP client uses a ping to detect address conflicts.
B.    A DHCP server uses a gratuitous ARP to detect DHCP clients.
C.    A DHCP client uses a gratuitous ARP to detect a DHCP server.
D.    If an address conflict is detected, the address is removed from the pool and an administrator must resolve the conflict.
E.    If an address conflict is detected, the address is removed from the pool for an amount of time configurable by the administrator.
F.    If an address conflict is detected, the address is removed from the pool and will not be reused until the server is rebooted.

Premium PassLeader 200-125 Dumps with VCE and PDF Download (Question 161 – Question 180)

New 200-125 exam questions from PassLeader 200-125 dumps! Welcome to download the newest PassLeader 200-125 VCE and PDF dumps: http://www.passleader.com/200-125.html (929 Q&As –> 1096 Q&As –> 1166 Q&As)

P.S. Free 200-125 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpeHlmcExhU2FVY00

QUESTION 161
Refer to the exhibit. A network technician is asked to design a small network with redundancy. The exhibit represents this design, with all hosts configured in the same VLAN. What conclusions can be made about this design?
passleader-200-125-dumps-1611

A.    This design will function as intended.
B.    Spanning-tree will need to be used.
C.    The router will not accept the addressing scheme.
D.    The connection between switches should be a trunk.
E.    The router interfaces must be encapsulated with the 802.1Q protocol.

100% Pass Guarantee PassLeader 200-125 Dumps with VCE and PDF for Free (Question 141 – Question 160)

New 200-125 exam questions from PassLeader 200-125 dumps! Welcome to download the newest PassLeader 200-125 VCE and PDF dumps: http://www.passleader.com/200-125.html (929 Q&As –> 1096 Q&As –> 1166 Q&As)

P.S. Free 200-125 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpeHlmcExhU2FVY00

QUESTION 141
Which two statements about static NAT translations are true? (Choose two.)

A.    They allow connections to be initiated from the outside.
B.    They require no inside or outside interface markings because addresses are statically defined.
C.    They are always present in the NAT table.
D.    They can be configured with access lists, to allow two or more connections to be initiated from the outside.

PassLeader 200-125 Exam Dumps Collection with VCE and PDF (Question 121 – Question 140)

New 200-125 exam questions from PassLeader 200-125 dumps! Welcome to download the newest PassLeader 200-125 VCE and PDF dumps: http://www.passleader.com/200-125.html (929 Q&As –> 1096 Q&As –> 1166 Q&As)

P.S. Free 200-125 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpeHlmcExhU2FVY00

QUESTION 121
Which two statements describe the process identifier that is used in the command to configure OSPF on a router? (Choose two.)
Router(config)# router ospf 1

A.    All OSPF routers in an area must have the same process ID.
B.    Only one process number can be used on the same router.
C.    Different process identifiers can be used to run multiple OSPF processes.
D.    The process number can be any number from 1 to 65,535.
E.    Hello packets are sent to each neighbor to determine the processor identifier.

PassLeader Valid 200-125 Dumps with VCE and PDF (Question 101 – Question 120)

New 200-125 exam questions from PassLeader 200-125 dumps! Welcome to download the newest PassLeader 200-125 VCE and PDF dumps: http://www.passleader.com/200-125.html (929 Q&As –> 1096 Q&As –> 1166 Q&As)

P.S. Free 200-125 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpeHlmcExhU2FVY00

QUESTION 101
Refer to the exhibit. The Lakeside Company has the internetwork in the exhibit. The administrator would like to reduce the size of the routing table on the Central router. Which partial routing table entry in the Central router represents a route summary that represents the LANs in Phoenix but no additional subnets?
passleader-200-125-dumps-1011
A.    10.0.0.0/22 is subnetted, 1 subnets
D 10.0.0.0 [90/20514560] via 10.2.0.2, 6w0d, Serial0/1
B.    10.0.0.0/28 is subnetted, 1 subnets
D 10.2.0.0 [90/20514560] via 10.2.0.2, 6w0d, Serial0/1
C.    10.0.0.0/30 is subnetted, 1 subnets
D 10.2.2.0 [90/20514560] via 10.2.0.2, 6w0d, Serial0/1
D.    10.0.0.0/22 is subnetted, 1 subnets
D 10.4.0.0 [90/20514560] via 10.2.0.2, 6w0d, Serial0/1
E.    10.0.0.0/28 is subnetted, 1 subnets
D 10.4.4.0 [90/20514560] via 10.2.0.2, 6w0d, Serial0/1
F.    10.0.0.0/30 is subnetted, 1 subnets
D 10.4.4.4 [90/20514560] via 10.2.0.2, 6w0d, Serial0/1

Pages: 1 2 ... 130 131 132 133 134 135 136 137