PassLeader New Cisco Exam Dumps Collection
http://www.ciscobraindump.com/valid-500-006-dumps-with-vce-and-pdf-for-free-question-1-question-6.html
Export date: Wed Sep 19 1:15:52 2018 / +0000 GMT

Valid 500-006 Dumps with VCE and PDF for Free (Question 1 - Question 6)


New 500-006 exam questions from PassLeader 500-006 dumps! Welcome to download the newest PassLeader 500-006 VCE and PDF dumps: http://www.passleader.com/500-006.html 3 1 (85 Q&As)

P.S. Free 500-006 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpR3hHSFhuYVl6V00 4 2

QUESTION 1
Which Cisco TelePresence C Series Codec command will move the on-screen display to monitor output 4?

A.    configuration video osd output: 4
B.    xconfiguration video osd output: 4
C.    command video osd output: 4
D.    xcommand video osd output: 4

Answer: B

QUESTION 2
Which menu on the Cisco TelePresence VCS should you refer to in order to verify that an endpoint has registered?

A.    Application
B.    Status
C.    Security
D.    Configuration

Answer: B

QUESTION 3
After you change the IP address of a Cisco TelePresence Codec C90, you are unable to use Telnet or a browser to connect to that address. However, you are able to use ping to connect to the new address. What are the two possible causes? (Choose two.)

A.    The configuration failed and there is another device with the same address that responds to the ping.
B.    The codec disabled the Telnet and HTTP services after the IP address change.
C.    The codec needs to reboot after the IP address change in order to bind the services to the new address.
D.    The gatekeeper configuration failed and you need to set up the gatekeeper address and the discovery type again.

Answer: AC

QUESTION 4
The camera remote control is not responding. What can an engineer check in order to determine if the camera remote control or the system is causing the problem?

A.    The monitor is on the right channel.
B.    The switch inside the remote control is switched on.
C.    The light flashes on the camera when a key is pressed.
D.    The batteries are correctly placed within the remote.

Answer: C

QUESTION 5
On a Cisco TelePresence CLI, which command is the correct syntax to run a traceroute to a remote host?

A.    network traceroute {dest}
B.    tracert {dest}
C.    utils network tracert {dest}
D.    set tracert {dest}

Answer: C

QUESTION 6
How many CTMS can be configured in Cisco TelePresence Manger?

A.    1
B.    2
C.    3
D.    unlimited number

Answer: D


New 500-006 exam questions from PassLeader 500-006 dumps! Welcome to download the newest PassLeader 500-006 VCE and PDF dumps: http://www.passleader.com/500-006.html 3 1 (85 Q&As)

P.S. Free 500-006 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpR3hHSFhuYVl6V00 4 2

Links:
  1. http://www.passleader.com/500-006.html
  2. https://drive.google.com/open?id=0B-ob6L_QjGLpR3hH SFhuYVl6V00
  3. http://www.passleader.com/500-006.html
  4. https://drive.google.com/open?id=0B-ob6L_QjGLpR3hH SFhuYVl6V00
Post date: 2017-02-10 14:01:55
Post date GMT: 2017-02-10 14:01:55

Post modified date: 2017-02-10 14:01:55
Post modified date GMT: 2017-02-10 14:01:55

Export date: Wed Sep 19 1:15:52 2018 / +0000 GMT
This page was exported from PassLeader New Cisco Exam Dumps Collection [ http://www.ciscobraindump.com ]
Export of Post and Page has been powered by [ Universal Post Manager ] plugin from www.ProfProjects.com